WUXI ZHONGTUO ROLL FORMING MACHINERY CO LTD C Channel Forming Machine,C Forming Machine,C Lipped Channel Machine

C lipped channel forming machine

حصة ل:  
    سعر الوحدة: USD 19000 / Set/Sets
    الدفع نوع: L/C,T/T,D/P
    Incoterm: FOB,CFR,CIF
    أدني كمية الطلب: 1 Set/Sets
    موعد التسليم: 60 أيام

معلومات أساسية

نموذج: ZT-C CHANNEL MACHINE

C Section Floor Beam Machine Voltage: 380-415 V

C Section Floor Beam Machine Controling: PLC

C Section Floor Beam Machine Color: Blue Or Can Be Painted As Your Required Color

C Section Floor Beam Machine Shaft Material: Cr12

C Section Floor Beam Machine Transmission: Double Chain With 1.2 Inch

C Section Floor Beam Machine Shaft Diameter: 80mm

C Section Floor Beam Machine Roller Station: 12 Stations

C Section Floor Beam Machine Main Motor Power: 15 KW

Main Forming Machine Weight: 6.5 Ton

Main Forming Machine Size: 9.5m*1.8m*1.5m(L*W*H)

Additional Info

تفاصيل التعبئة والتغليف: plastic film full packaged, and loaded into the standard container

إنتاجية: 20 sets per month

علامة تجارية: CH

نقل: Ocean,Land

مكان المنشأ: China, Wuxi

تفاصيل التجارة القدرة علي التوريد: 300 sets per year

الشهادات: CE,ISO9001

رمز النظام المنسق: 8455221000

ميناء: Shanghai Port,Tianjin Port

وصف المنتج

C lipped channel forming machine

C lipped channel forming machine is a line which can produce different sizes of C purlines by changing the spacer. The character of this C lipped channel forming machine is with low cost, and easy to change the space to adjust the size. The thickness of this C section floor beam is 1.5-3.0mm, size is from 80-300mm. For any sizes you need, we will know it and custom design the machine for you. We need to know the flange, the depth, the thickness,the lips.

C section roll forming machine (5)

C section roll forming machine (6)

C section roll forming machine (1)

Steel thickness (t): from 1,5 mm to (at least) 3,0 mm;
Profile height (h): from 100 mm to (at least) 300 mm;
Flange width (b): from 40 mm to (at least) 80 mm;
Flange height (c): from 12 mm to (at least) 20 mm;
Maximum hole diameter deviation: +2 mm/-0 mm
Minimum finished product length: at least 1500 mm;
Maximum finished product length: at least 12000 mm;
Length tolerance: ±1.5mm per each pieces

C section roll forming machine (2)

C section roll forming machine (3)

C purlin roll forming machine (8)

C lipped channel forming machineincluding below parts:

Technical Specification
Ⅰ: General properties
Maximum production speed: not less than 15 meters per minute excluding cutting and punching);
Bending precision: the maximum profile deviations (dimensions and shape) shall not exceed the tolerances specified as following data (or equivalent tolerances);
Bending quality: ability to bend the profiles of the specified configuration at the specified maximum steel thickness; cracking of the steel or metal coating is not permitted for all required steel grades.

CZ purline machine

The 3 tons manual decoiler, the feeding leveling system, the main roll forming machine, the hydraulic cutting system and receiving table.

Below is the working flow for your reference:

steel frame machine

C purlin roll forming machine (1)

Below are some pictures for your reference:

C purlin roll forming machine (4)

This is the adjustable cutting system, by this adjustable cutting system, you can cut any size you need, but no need to change the cutting blade. Just adjust the shaft left or right, up or down. This C section floor beam C purline machine cutting system is popular in the C purline roll forming machine.Easy to control, but with low cost.

C purlin roll forming machine (7)

C purlin roll forming machine (7)

3T decoiler
Dimensions: 1700mm*1000mm*800mm
Width of feeding: 300mm
Capability: 3Ton
Range of expand(by manual): 420mm-510mm
Mode of expand &fight: inner expand &fight by manual
Way of feeding: manual
Color: Blue (or base on customer request)
Quantity: 1

C purlin rolling machine (3)

Feeding
Adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to flattener.
Feeding type: adjustable
Feeding width range:200-600mm
Entrance and guide roller: diameter is ¢65mm, material is SAE1045, HRC48-52° surface with chrome
Flattener
The quantity of leveler rolls must be planned according to thickness 1.5mm to 3.0mm.
Flattener roller: upper is 3 rollers, down is 4 stations(total is 7 rollers)
Flattener roller material: SAE 1045 thermal treatment hardness 48-52 HRC.
Diameter of flattener shaft: ¢76mm, material is SAE 1045, hardening and tempering
Drive by motor: 4kw AC motor (Guomao of China)

steel frame machine

steel frame machine

C purlin rolling machine (4)

Punching:
Base on customer provide punching drawing, this machine need adopt two units hydraulic punching system
The punches will be connected to a single hydraulic unit having tank, motor, pump, pressure control valves, pressure gauges, solenoid valves, hydraulic hoses, all designed to operate safely at the required operating pressure; also to facilitate changing O-ring they must be of standard size, also consider suitable cooling unit.
The punches and dollies will be CR-12, hardness HRC 58-62 and chrome coating both punches and dolies should be easily replaceable without requiring disassembly of complete units.
The whole punching operation should be automated and controlled by a program installed in the PC which is located in the operator's console.
Hydraulic power: 5.5kw
Working pressure: 12-16Mpa
Sample photo for reference:

The main motor system of the adjustable roll forming C Section Floor Beam rollformer.

C purlin roll forming machine (4)


Forming Section
Material of the profile: steel sheets for cold bending according to EN 10346 or equivalent requirements, steel grades to (at least) S450 GD, or other grade of steel with equivalent yield strength, with metal coating from Z100 to (at least) Z350;
Thickness range: 1.5-3.0mm
Maximum production speed: not less than 10 meters per minute (for non-perforated profiles, excluding cutting)
Machine Voltage, Frequency, Phase:380 V, 50 Hz, 3Phase
Roll station:14 stations
Roller material:ASTM52100 chrome plated surface with hardness 58-62 degree ,CNC,
Shaft diameter: ¢76mm material: SAE1045 with quenching and tempering
Transmission: by chain, one inch, double line
Roll former has leveling bolts in the base for adjust the leveling
Machine base frame adopt H beam welding steel
In the main roll forming machine have 2 buttons for urgency stop if happen any malfunction.
Machine adopt iron cast as station to make machine in strong
To avoid accidents,all of drive part adopt protect cover
Color of machine: Blue and yellow (or base on customer request)


C purlin rolling machine (1)


CZ steel frame machine



C purline rollformers (4)

C purline rollformers (2)

C purline rollformers (3)


صورة المنتج
  • C lipped channel forming machine
  • C lipped channel forming machine
  • C lipped channel forming machine
  • C lipped channel forming machine
  • C lipped channel forming machine
البريد الإلكتروني لهذا المورد
  • *الموضوع:
  • إلى:
  • *رسائل:
    يجب أن تكون رسالتك بين 20-8000 الأحرف
قائمة المنتجات ذات الصلة C Channel Forming Machine , C Forming Machine , C Lipped Channel Machine

اشترك في النشرة الإلكترونية:
الحصول على التحديثات، خصومات وعروض خاصة وجوائز كبيرة!

متعدد اللغات:
حق النشر © 2019 WUXI ZHONGTUO ROLL FORMING MACHINERY CO LTDحق الطبعة الملكية
التواصل مع مزود؟المزود
Rina Ms. Rina
ماذا يمكنني أن أفعل لك؟
الدردشة الآن الاتصال المورد